Tuning fork density meter is a high-precision, high-applicability vibration principle density meter produced by introducing the most advanced frequency tracking technology from abroad.

The product design uses plug-in installation and is widely used in pipelines, open tank containers and closed tank containers Medium density detection.

The tuning fork density meter sensor is composed of two piezoelectric crystals.

One piezoelectric crystal generates vibration and the other piezoelectric crystal detects vibration.

The tuning fork sensor has a built-in temperature sensor to compensate the temperature of the piezoelectric crystal.

The split line of split tuning fork density meter is up to 2 meters in length. In order to reduce the interference of the tuning fork sensor line, a single wire jacket is used to protect the sleeve.

The sensor line must be protected from interference and damage at the scene. It is relatively weak, and it is not recommended to use it in the place with electromagnetic interference.

Parameter New Type Oil Portable Online Digital Tuning Fork Density Meter

Measuring range:	0 ~ 3 g / cm³ optional
Output:	4-20 mA signal (4-wire system)
Accuracy:	0.3% (real-time range) or 0.001 g / cm³ whichever is greater.
Installation:	DN50 DN80 DN100 and threaded installation (threaded installation with mounting base)
Resolution:	0.0001 g / cm³
Application range	: -30 ~ 120 degrees
Maximum working pressure:	20MPa
Protection level:	IP65
Fork body material:	stainless steel 316, Hastelloy C22, manganese alloy 400
Fork body coating:	coating (perfect hydrophobic and non-stick impurities in liquid)

Application New Type Oil Portable Online Digital Tuning Fork Density Meter

Measurement of slime density (concentration) in the process of coal delivery. Measurement of slurry density (concentration) in the process of beneficiation; Syrup density (concentration) measurement Measurement of starch emulsion density (concentration) (dry matter mass) Lime slurry density (concentration) measurement and alarm for desulfurization projects Ammonia density (concentration) measurement for denitration projects Density (concentration) measurement of concentrated solutions in the pharmaceutical industry Alcohol and water surface density (concentration) measurement Density (concentration) measurement of various types of pipelines or tanks

Product Tags:

0.3%FS Tuning Fork Density Meter , SS316 Tuning Fork Level Sensor

Smart Water Pressure Sensor

Air Pressure Transducer Sensor

Oil Pressure Sensor

Pressure Gauge Calibrator

Stainless Steel Pressure Regulator

Submersible Level Sensor

Dead Weight Tester

Dry Block Temperature Calibrator

Differential Pressure Transmitter

High Temperature Pressure Transducer

Differential Pressure Gauge

Digital Pressure Gauge

Radar Level Meter

Gas Flow Meter

Digital Flow Meter

Water Flow Meter

Wall Mounted Ultrasonic Flow Meter

Tuning Fork Density Meter

0.3%FS Tuning Fork Density Meter , SS316 Tuning Fork Level Sensor

how to test transistor using multimeter

fluke meter calibration

test transistor with digital multimeter