Vibrating Fork Density Meter Principle: Tuning Fork density sensor adopt fork sensors (one pair fork ceramic chip), one of piezoelectric ceramic chip is responsible for generating vibrations, another is responsible for collecting vibration.
Vibrating Fork Density Meter in different density solution with different resonant frequencies, the resonance frequencies was different, according to the relationship of different vibration and density to calculate the density. The resonance frequency of the tuning fork density sensor is between 1600-2400. The higher the frequency the smaller density.

Detailed Images of Online Tuning Split type Tuning fork density meter price

Specification of Online Tuning Split type Tuning fork density meter price

Name	Vibrating Fork Density Meter
Measure range	0–3g/cm3 (3 /2.5/ 2 /1.5/ 1) (0 – 3000 kg/m3)
Accuracy	±0.001g /cc (±1 kg/m3)
Operating temperature	-50℃ ~ +200℃
Max work temperature	20MPa
Fluid viscosity range	0 – 20000 cP
Temperature coefficient	0.1 kg/m3/℃
Pressure influence	Can be ignored
Built in temperature sensor	PT100
Wetted part material	Stainless steel, Hastelloy C22, manganese alloy 400, titanium alloy, etc.
Fork body coating	Standard type, PTFE or electrolytic polishing
Power supply	20–28 VDC,35–45 mA
Analog signal output	4-20 mA, isolated, non self powered
Output accuracy	±0.1%FS, ±0.05%FS (20℃)
Output repeatability	± 0.05% FS @ (-40~ 85℃)
Process connection	1.5"NPT threaded connections; din 50 PN40 and PN100 flange connections;
Insertion depth	125mm~2000mm (from flange to the end of the fork)
Display	Density value(kg/cubic meter or g/cc) showed at upper screen, the temperature showed at lower screen.
Accessory	can choose temperature of 4-20 mA output signal.
Protection	IP65

Features of Vibrating Fork Density Meter

1. Inserted type, easy to install.
2. Continuous on-line measurement
3. No moving parts, maintenance-free
4. Specific conditions do anti-corrosion design
5. Temperature compensation
6. Explosion-proof certificate(Exd II CT4)
7. Do long rod type design(max can do 2m)
8. Suitable for high pressure piping(max pressure 20Mpa)

Installation of Vibrating Fork Density Meter

Product Tags:

Vibrating Split Type Tuning Fork Liquid Density Meter 2m Insertion

Smart Water Pressure Sensor

Air Pressure Transducer Sensor

Oil Pressure Sensor

Pressure Gauge Calibrator

Stainless Steel Pressure Regulator

Submersible Level Sensor

Dead Weight Tester

Dry Block Temperature Calibrator

Differential Pressure Transmitter

High Temperature Pressure Transducer

Differential Pressure Gauge

Digital Pressure Gauge

Radar Level Meter

Gas Flow Meter

Digital Flow Meter

Water Flow Meter

Wall Mounted Ultrasonic Flow Meter

Tuning Fork Density Meter

Vibrating Split Type Tuning Fork Liquid Density Meter 2m Insertion

alibaba tension transducer

spring loaded wafer check valve

linear taper potentiometer